Home ProductsSwitch Power Supply

PSB1210-9 DC12V 10A 9Channels CCTV Distributed Boxed Switch Mode Power Supply

PSB1210-9 DC12V 10A 9Channels CCTV Distributed Boxed Switch Mode Power Supply

PSB1210-9 DC12V 10A 9Channels CCTV Distributed Boxed Switch Mode Power Supply

Product Details:

Place of Origin: CHINA
Certification: CE, FCC, ROHS
Model Number: PSB1210-9

Payment & Shipping Terms:

Minimum Order Quantity: 50pcs
Delivery Time: 2-30days
Supply Ability: 100000pcs/month
Contact Now
Detailed Product Description
Output Voltage: DC12V Output Frequency: 50-60Hz
Output Current: 10A Output Power: 101 - 200W
Output Type: 9 Port Channels Input Voltage: AC100V-240V

CCTV DC Boxed Switching Power Supply

Key Feature:

Model: PSB1210-9

Input: AC100-240V, 50-60Hz

Output: DC12V, 10A, 9Port Channels

AC Input Plug: US,EU,UK,etc.available

Multiple Protection: Over Current/Voltage/Load (PTC Fuse)

Box Size: 28.5cm*21cm*5.1cm, 1.7kg/piece

 

Specification

Item

12V DC, 10A, 9 Channels Boxed CCTV Power Supply

Model

PSB1210-9

Output

Voltage

12 V

Current (Rated)

10 A

Power (Rated)

120 W

Output Port

9

Ripple/Noise (Max.)

150mVp-p

Voltage (Adjust Range)

4.75-5.5 V

Voltage Accuracy

±2.0%

Line Regulation

±1.5%

Load Regulation

±1.5%

Time(Start, Rise, Hold)

1000ms, 30ms/230VAC, 1000ms,30ms/115VAC(Full-Load)

Input

Voltage (Range)

85-264 V AC

120-370 V DC

Frequency (Range)

47-63 Hz

Efficiency (Typ)

79%

81%

AC Current

0.3A/115V AC

0.25A/230V AC

Surge Current

Cold boot: 40A/100V AC

80A/230V AC

Leakage Current (Max)

<2mA/240V AC

Protection

Over Load

Not over 105% rated output power

Mode: Hiccup Mode, Recover after removing the over-load

Over Voltage

5.75-6.75V

13.8-16.2V

Mode: Shut down the output, Zener diode clamp

Over Temperature

Protection will be triggered when the temperature of connect point inside the transistor over 140℃

Mode: Shut down the output, Auto-recover after the temperature return to normal value.

Environment

Operate Temperature

-20 ~ 60 ℃

Operate Humidity

20 ~ 90%RH, no condensing

Storage Temperature

-40% ~ 85 ℃

Storage Humidity

10% ~ 95%RH, no condensing

Temperature Factor

±0.03%/℃(0 ~ 45℃)

Vibration Resistance

10 ~ 500Hz, 2G10mins/cycle,  X,Y,Z axis each 60 minutes

Safety & EMC

Safety Specification

UL60950-1, CB(IEC60950-1), CCC GB4943.1:2011 Approved

Electric Strength

I/P ~ O/P:3KVDC; I/P ~ FG:2KVDC; 0/P ~ FG:0.5KVDC

Insulation Resistance

I/P ~ O/P , I/P ~ FG , 0/P ~ FG:100M Ohms/500VDC/25℃/70%RH

EMC Radiation

Conform to EN55022(CISPR22) ClassB, EN61000-3-2,3

EMC Immunity

Conform to EN61000-4-2,3,4,5,6,11,EN55024,EN61000-6-1, A level QB SG

MTBF

≥563.5Khrs MIL-HDBK-217F(25℃)

Note

1. All specs and parameter, in the absence of special note, are measured base on 230VAC Input, Rate Loading, 25℃, 70%RH environment.

2. Volts D.C. Measuring Method: measure at the end of plug-in terminal under 50% loading condition

3. Ripple/Noise measuring method: Use a 12" twisted pair and terminal parallel connecting with 0.1uf and 47uf capacitance and measure in 20MHZ bandwidth

4. Accuracy: Include assigned error, Line regulation, Load regulation

5. Line Regulation Measurement: Measure range from low voltage to high voltage under rated loading

6. Load Regulation Measurement: Measure range from 0% to 100%

7. According to the rule GB4943.1, power supply only applicable in the place where elevation lower than 2000m and non-tropical climate area safely

8. Power supply shall be deemed to be part of system components, so it has to be applied based on electromagnetic related confirmation.

 

Contact Details
POETRONICS INDUSTRIAL LIMITED

Contact Person: Miss. Catherine

Tel: 86-755-33122477

Fax: 86-755-33122477

Send your inquiry directly to us (0 / 3000)