Home ProductsPoE Power Adapter

24VDC,2A POE Switching Power Adapter & Supply

24VDC,2A POE Switching Power Adapter & Supply

    • 24VDC,2A POE Switching Power Adapter & Supply
    • 24VDC,2A POE Switching Power Adapter & Supply
  • 24VDC,2A POE Switching Power Adapter & Supply

    Product Details:

    Place of Origin: CHINA
    Model Number: POE-A2402

    Payment & Shipping Terms:

    Delivery Time: 3-30days
    Contact Now
    Detailed Product Description
    Output Voltage: 24V Output Frequency: 50-60Hz
    Output Current: 2A Output Power: 1 - 50W
    Output Type: Single Input Voltage: AC 100-240V
    Transmission Rate:: 10M/100Mbps Protocol Standard:: Non-IEEE802.3



    Over View:

    PoE (Power over Ethernet) adapter provide a power solution for the related device, it can supply power and simultaneously be a media for data transfer in anywhere there is a cat5 cable.


    General Specification:


    Input:AC100-240V, 50-60Hz

    Output:DC24V, 2A; ≦48W


    Key Feature:

    1. Good anti-interference performance, high reliability

    2. Low DC ripple, high efficiency, low standby power consumption, lower heating value, natural cooling, long service life.

    3. Broad input voltage range (100-240VAC), conform to multinational use standard.

    4. Excellent insulating performance, higher dielectric intensity.

    5. Good load capacity, constant current & constant voltage, wider adaptive range, over-voltage protection for input and output, short-cut protection, over-current protection.

    6. The shell is made of flame resisted engineering plastic, which greatly improve the equipment using safety

    7. Transmission Distance: Max.100 meters (CAT 5 or better cable). It specifically depends on the quality of network cable, supply voltage and adaptability of power device for voltage. The higher quality of network cable, the voltage drop will be less, and the effective power distance will be further accordingly.



    Direct Feeding=Plug and supplying power, supplying power directly without advanced detection for Power Device (PD)



    Output Power:


    Min. Load

    Max. Load

    Peak Current

    Output Power

    24 VDC

    0 A

    2.0 A

    2.0-2.2 A

    48 W


    Loading Characteristics/Regulation:


    Min. No-Load Voltage

    Max. No-Load Voltage

    Line Regulation

    Load Regulation

    24 VDC


    24.24 V




    Technical Specification

    Input Voltage/Frequency

    AC100-240V; 50-60Hz

    Input Adjusting Range

    AC90-264V; 47Hz~63Hz

    Output Voltage/Current

    24V, 2A

    Output Voltage Regulation


    Load Regulation


    Reset Function

    Default non-resettable, it’s optional

    DC Output Broadband Noise Voltage

    3.4kHz~150kHz ≤50mv


    Remote Power Supply Protection

    Output over-voltage protective range: -52V~-50V DC

    Over-current protective range(single port): 800mA~1000mA

    Input over-voltage protection range: 290V~310V AC

    Input over-voltage recovery value: >285V AC

    Input under-voltage protection range: 140V~155V AC

    Input under-voltage recovery value: <165V AC

    Over temp protection range: >100℃

    Network Port Mark

    Data&Power Out=Power pin (4/5 “+” & 7/8 “-”) + Data pin (12/36)

    Data In=Data pin (12/36)

    Transmission Rate


    LED Power Indicator

    Green Color;

    Indicator On: Power in normal working condition;

    Indicator Off: Power supply failure;

    Note: When the power in normal working condition, after connecting network cable, the indicator off means it’s in over-load protection or shortcut status, it should be the requiring power of powered device is too high, network cable is shortcut or the powered device is broken.

    System Reliability


    Environmental Requirement

    1. Operating/Ambient Temperature: -5℃~55℃

    2. Relative Humidity: 5%~90%RH

    3. Operating and Storing Place: Ventilation and heat dissipation, Clean, No conductive dust, No corrosive gas

    4. Place of No dangerous of explosion

    Safety Assurance

    Conducted Emission(CE) and Radiated Emission(RE) compliant with EN55022, Class B standard


    120mm×58mm×38mm;  <200g

    Power Plug Specs

    EU/US/UK/AU Plug are available

    Lightning Protection

    AC Input can stand 5 times positive & negative 5KV, 8/20uS instantaneous current wave, lasting 1 minutes each time. The lightning protection circuit of the power adapter have invalidation alarming function and protective components like glass protective tube


    This is ordinary switching power supply, great protective performance, superior stability and adaptability connecting with power device, its scope of application include security surveillance, wireless access point, electrical machine, communication equipment, health care products and those POE supported equipment.


    One year


    Contact Details

    Contact Person: Miss. Catherine

    Tel: 86-755-33122477

    Fax: 86-755-33122477

    Send your inquiry directly to us (0 / 3000)