Home Products16 Port PoE Switch

POE-S216T 16 Port IEEE802.3at 10/100Mbps 30W POE Switch (400W Internal Power)

POE-S216T 16 Port IEEE802.3at 10/100Mbps 30W POE Switch (400W Internal Power)

    • POE-S216T 16 Port IEEE802.3at 10/100Mbps 30W POE Switch (400W Internal Power)
    • POE-S216T 16 Port IEEE802.3at 10/100Mbps 30W POE Switch (400W Internal Power)
  • POE-S216T 16 Port IEEE802.3at 10/100Mbps 30W POE Switch (400W Internal Power)

    Product Details:

    Place of Origin: CHINA
    Brand Name: POETRONICS
    Certification: CE, FCC, ROHS
    Model Number: POE-S216T

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pcs 8CH POE Switch (POE-S216T)
    Price: Negotiable POE Price
    Packaging Details: 4pcs/ctn; 52.5cm*43.5cm*35cm
    Delivery Time: 2-30days
    Payment Terms: T/T, Western Union, PayPal
    Supply Ability: 200,000/month
    Contact Now
    Detailed Product Description
    Switch Capacity: 7.2 Gbps Ports: 16
    Transmission Rate: 10/100Mbps Communication Mode: Full-Duplex & Half-Duplex
    Function: POE Products Status: Stock
    Power Supply:: Input:AC100-240V; Output: 400W (Internal) PoE Output Voltage:: DC 48V
    PoE Output Power:: Max.30W Single Port PoE Output Current:: Max.600mA Single Port


    16 Port IEEE802.3at 10/100Mbps 30W POE Switch

    2 Gigabit SFP slot Uplink and 2 Gigabit RJ45 Uplink

    7.2Gbps Switch Capacity, 400W Internal Power Supply

    POE-216T is an 16 port channels unmanaged Power Over Ethernet Switch that with 16 10/100Mbit RJ45 PoE ports, 2 Gigabit Copper and 2 SFP Combo uplink ports, which is compliance with IEEE802.3af standard, and it has a 400watts power supply built-in. Power Over Ethernet (POE), as might be expect, describes the use of a single Ethernet cable(standard gauge cat5, cat5e or cat6, etc.) to carry electrical power along with Ethernet data. POE-S216T 16 Port IEEE802.3at 10/100Mbps 30W POE Switch (400W Internal Power)

    There are total 16 output channels PoE, a single port output up to 25.4W, which is suitable for devices such as IP Video Camera, Wireless Access Point (AP), Access Control, VoIP, etc., they are also known as Powered Device (PD). So, before the PD is powered up, there is a procedure for Power Sourcing Equipment (PSE) built in PoE to implement compatibility checking. The PD must reply a signature for PSE to check if it's PoE-enabled for the PoE connection, which take place a few seconds before power is switched on. It also executes a power classification after first signature detection process, which will figure out how much the connected PDs require(Power Class up to approximately 4, 7 and 13 watts), and the power connection will be automatically cut when the PDs are disconnected or in incorrect installation, which prevents damages of overload, underpowring, short-cut or connecting a Non-PoE device.

    Finally, this 16 ways PoE switch will greatly reduces the comprehensive cost including cables, labour force, time, management and broken device results from incorrecting installing if no PoE connection. On the other hand, its 7.2Gbps switching capacity effectively relieve the office network cngestion and improve working effeciency. 


    Main Features

    1. 16 Port 10/100Mbps Unmanaged PoE Switch, 2 Gigabit Copper RJ45 Uplink and 2 SFP Slot Combo Uplink

    2. Support 16 channles power output delivering to PoE Powered Device

    3. Comply to IEEE 802.3at standard

    4. Each Switching port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) and 1000/2000Mbps (Gigabit Ethernet) 

    5. On/Off power switch, 7.2 Gbps Switching Capacity, Learning and auto-aging

    6. Prevention of packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)

    7. High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

    8. Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput


    Detailed Specification

    Item: 16 Ports Power Over Ethernet Switch (30W POE)

    Model: POE-S216T

    PoE Power Output: 48V DC, Max. 30 watts a single port 

    Power Pin Assignment: 1/2(+), 3/6(-)

    Ethernet Port: 16 Ports 10/100Base-TX RJ-45 Auto-MDI/MDI-X 

    PoE Standard: IEEE 802.3af/at Power over Ethernet / PSE End-Span

    Gigabit Port: 2 Gigabit SFP +2 Gigabit RJ45 Uplink

    PoE Port: 16 Ports with PoE PSE Injecting Feature

    Switch Fabric: 7.2Gbps

    Power Supply: 400 watts, Input: 100-240V AC, 50-60 Hz

    Flow Control: Back pressure for half duplex, IEEE 802.3x pause frame for full duplex

    Transfer Method: Store-and-Forward

    Protocol Standard:

        - IEEE 802.3 Ethernet

        - IEEE 802.3u Fast Ethernet

        - IEEE 802.3ab Gigabit Ethernet

        - IEEE 802.3z Gigabit Ethernet

        - IEEE 802.3x Full-duplex Flow control

        - IEEE 802.3af Power over Ethernet

        - IEEE 802.1Q VLAN

        - IEEE 802.1p QoS

    Ambient Environment:

        - Operating Temperature: 0°C ~ 50°C (32°F~122°F)

        - Storage Temperature: -40°C ~ 70°C (-40°F~158°F)

        - Operating Humidity: 5%~ 90%, Storage: 5%~ 90% (Non-condensing)

    Safety Standards: CE, FCC, ROHS

    Dimension: 440mm×350mm×45mm (1U height); Weight: 6.2kg

    Warranty: One year

    Contact Details

    Contact Person: Miss. Catherine

    Tel: 86-755-33122477

    Fax: 86-755-33122477

    Send your inquiry directly to us (0 / 3000)

    Other Products